Grease and food solids collect in an interceptor as wastewater passes through it. Buildup around fittings or along the flow path can make the tank harder to check and restrict wastewater movement. Slow drains or standing water in the sink can point to a problem with the interceptor. Cleaning removes accumulated material and makes internal parts easier to examine. Call to describe the problem to a provider in your area.
Call (949) 638-5866 to reach a provider →
How interceptors differ from indoor traps
An indoor grease trap is generally located near kitchen fixtures, while an interceptor is usually below ground outside the building. Both give grease and solids time to separate from wastewater before it continues down the drain.
Interceptors hold more material and have fittings inside a tank that may be reached through access lids. Their capacity commonly ranges from about 500 to several thousand gallons. Knowing which equipment you have helps you describe the job and locate the access points.
What thorough cleaning includes
- Remove accumulated grease, wastewater and settled solids from the tank.
- Clean residue from the tank walls and accessible internal surfaces.
- Clear buildup around the inlet and outlet tees.
- Clean around baffles so their condition can be seen.
- Check the sample box, if present, for grease and debris.
- Use jetting where needed to loosen buildup in accessible lines or fittings.
Ask what the cleaning includes and request service records showing the work performed and material removed.
Confined space considerations
An interceptor is a confined space where hazardous gases can collect and oxygen may be insufficient. Opening a lid does not make the space safe to enter, and the danger may not be obvious from above.
Providers generally pump and clean through access openings from above, using equipment that reaches into the tank. Keep kitchen staff away from open lids, and ask how the work will be done if access to an internal part is difficult.
Inspecting tees, baffles and lids
The inlet and outlet tees guide wastewater through the interceptor. Baffles help separate the flow inside the tank. Grease coating these parts can hide damage or make a missing section difficult to notice.
Once accessible surfaces are clean, ask the provider to check for loose, damaged or missing fittings and explain any concerns. A damaged outlet tee can affect how well grease stays in the tank.
Lids also need attention. A lid that does not sit securely can create an access hazard or let surface water into the tank. Note any concerns in your maintenance files.
How buildup affects inspections
Heavy grease and solids can cover the outlet tee and baffles, making their condition harder to see during an inspection. Buildup in a sample box makes it harder to examine the wastewater there.
Keep service records showing when the interceptor was cleaned and what work was performed. Your city or sewer district sets local requirements, so check what records and access an inspection may require. Ask the provider to document any damaged or missing parts.
What affects the price of interceptor cleaning
The tank's capacity and the amount of grease, wastewater and settled solids to remove can affect the price. Access matters too: buried lids, a difficult route to the tank or limited room for equipment may add work. The scope of cleaning, whether jetting is needed, disposal requirements and any repairs are other factors to discuss with the provider before work begins.
Grease interceptor cleaning questions
Is interceptor cleaning different from interceptor pumping?
Pumping removes the tank contents. Cleaning can also include removing residue from walls and fittings, clearing accessible tees and checking the sample box. Ask what is included so you know whether those areas will receive attention.
How do I find my interceptor?
Look for access lids outside the building, often near the kitchen or in a parking or service area. Building plans or past cleaning paperwork may show the location. Lids can be buried or covered, so avoid digging or opening them yourself.
What if parts inside are broken?
Ask the provider to identify the damaged part and explain whether repair or replacement is needed. A broken baffle or outlet tee can affect separation. Keep a record of the finding and any work completed.
Can cleaning happen while the kitchen is open?
That depends on access to the interceptor and whether kitchen drains need to stay out of use during the work. Discuss your operating hours and drain use with the provider so you can plan around food preparation and cleanup.